27
Ever since I saw the first streamliner from the era between the wars, I was in love with the great shapes and details. Coachbilders created stunning works of art back then and the owners took pride in owning these rigs. This International Harvester D-300 has been converted into a tow truck with a custom-built streamline aluminum body by a shop in Sleepy Eye, Minnesota. Apparently the shop was called Ebenhoh Custom Truck Body, according to The Old Motor. Apart from lowering the truck and adding larger diameter wheels with lower profile tires, I didn’t change anything on Tugboat Annie. But if you let your imagination run wild, you might think about a hot rod motor under the cab.
R&R Vacuumcraft made a 1/25 scale resin kit, which unfortunately is out of production. If I can find one somewhere, I will build a scale model of the lowered truck.
26
The second generation (1980-1985) of the Cadillac Seville is a beautiful rather ugly vehicle. The chopped trunk is a weird design feature and was never really considered cool at any point in time. I remember one custom Mk2 Seville from roughly twenty years ago that was chopped, lowered and equipped with then-cool billet wheels that I liked. However, they did keep the four doors and ever since then I wondered what a two-door conversion might look like. A couple of weeks ago I found a nice picture and went straight to work. The result is more interesting than beautiful, but as I didn’t expect much I can’t be disappointed. I love the color, though.
21
It’s been a long time since I last modified a truck with photoshop. Having a Moebius 1/25 scale model kit of the International Lonestar truck, I wondered how it might look without the tall sleeper cab before starting to build the kit. Starting up the graphics software and modifying the roof was easy enough… but once again my mind accelerated on it’s own and not too long after, the 2009 Harley-Davidson Special Edition was lowered, had bigger diameter wheels with low profile tires and many small improvements were done. Imagine a color-matched flatbed trailer behind it. Would be an awesome rig to haul freight with and display it at truck shows, wouldn’t it?
14
I pondered this question before, when I created the short wheelbase Cadillac Fleetwood:
What if downsizing the US land yachts went a little different?
Every car enthusiasts knows that the oil crisis in the early 1970’s eventually spelled the end for the gas guzzling land yachts. Cars from Europe and Japan with much better fuel economy flooded the US market and created a situation the big three had to face. They tried frantically to build something suitable. However, most cars they came up with were great achievements horrible miniature caricatures of the bygone era of dinosaurs. You fondly remember the downsized barges and new designs like the Ford Pinto, AMC Gremlin amongst others. Especially the shrunken Cadillacs and Lincolns put a sad expression on most peoples faces. But hey… what if they had approached the whole downsizing trend with a little bit of humor and left the interiors of the cars full-size and only compromised on the outside of the body and the drivetrain? They might have come up with something like this Pontiac Bonneville 2-Door Hardtop Shorty concept.
03
The Alfa Romeo 159 Furgone Sportivo pictured here is a follow-up to the Alfasud Furgone Sportivo I created last year. Basically the same idea, executed on a far more modern chassis (Type 939). I found a great picture of a metallic red 159 ti wagon and started, with the finished picture already in my mind. But then… I did the sensible thing got carried away and one idea led to another. From a simple all-red panel van conversion it escalated to a two-tone Alfa Romeo Assistenza & Servizio wagon, inspired by this Giulia Giardinera. To break up the hard contrast at the B-pillar and to lessen the impression of a simple hack-job, I added a small quarter window. This would also help the driver to better see pedestrians and cyclists when turning corners. I would really love to build this in 1:1 scale…
17
After almost 15 years without a Honda I wanted to try it again and bought a CL3 Accord with the 2.3 VTEC quite cheap from an elderly gentlemen in the Black Forest. So, after many RWD-only winters I drove FWD again. And let me tell you… I was so glad we had only one week of snow in the 2016/17 winter! Front wheel drive is just horrible and takes all the fun out of driving in wintery conditions. Therefore I sold the Accord as soon as the the first flowers blossomed and went back to rear wheel drive cars for good. Never again am I going to buy a winter car that powers the wrong axle.
And even though I didn’t do anything to the real car, apart from replacing the fake wood interior trim pieces with fake carbon from a Type-R model, I went creative with Adobe Photoshop and let my mind wander. What if the Accord had rear or all wheel drive? It could sure enough be a nice ride for any winter, don’t you think?
Modifications could include Rays TE37 wheels (or cheap knock-offs because they would get damaged by the salt anyway), auxiliary driving lights, mudflaps and a roof rack. The reality looked rather bland in comparison, as you can see in the picture below. I didn’t even bother to buy the Streusalz Edition stickers.
The Honda was very reliable and never let me down. And to be honest… I absolutely loved the rear wing with the integrated Gurney flap.
19
This is another one of those 15 minute challenges. I found a (very small and bad quality) picture of a Renault R18 Turbo wagon and thought this might look good converted into a shooting break. The actual shooting break conversion was done in six minutes, but it took forever to modify the rear wheel arch and to get the stance just right. The original ride height is more suited to a 4×4 trail than to a regular road and naturally I changed it. I kept the original wheel design, but increased the diameter an inch to 15″. This was fun, but it’s a shame the quality of the picture is horrible.
Prefer stock ride height and body? Check out the original picture.
PS: I might re-create this with a better picture at some point in the future.
14
A quick sketch on a napkin during lunch break last week inspired me to transform a full-size Oldsmobile Vista Cruiser into a station wagon surfers would have loved back in the late Sixties. Thanks to deleting the rear doors, the trunk space now reaches all the way forward to the B-pillar, which gives you plenty of room for the gear and a large sleeping area. The side glass has been replaced with metal, allowing for insulation and storage compartments on the inside walls. To ensure the period-correct look and feel I added fake wood to the sides, which is sourrounded by chrome trim. This also helps to stretch the lines of the vehicle. Imagine to lie in there with your favorite beach babe after a long day of surfing, pulling the curtains shut and gazing at the stars through the vista roof.
Check out the original image for comparison.
11
GM thought it was a brilliant idea to add some Swedish flavor to their rather sad and uninteresting line of mid-size SUVs by introducing the SAAB 9-7X. The 9-7X was a classical GM badge-engineering job with a couple of different trim pieces here and there. It’s not hard at all to guess that the Swedish designers and engineers didn’t have a lot of influence in the development.
Let’s imagine GM would have given free reign to the Swedish colleagues, with the only mandatory requirement that they must build it on an existing platform. They might have come up with what I imagined in the pictures below: a SAAB 9-5 based SuperWagon. It would have featured more interior space, more windows for the kids to see out of during road-trips, better handling and fuel mileage than the horrendous 9-7X. The already spacious trunk space of the 9-5 Wagon would have been enlarged in height and width to fit all the necessary gear a family of four might need for a holiday.
Creating a 2-door delivery van for those needing less seat and more room for cargo would have been rather easy. To keep the distinct SAAB profile, the safety conscious Swedes would have added a window just aft of the B-pillar to improve visibility. Now only one question remains: do you think the SuperWagon variants would have sold better than the GMT360 platform based 9-7X?
Take a look at the original picture for reference.
07
To be quite honest, I’m not the biggest fan of the Toyota FJ Cruiser styling. However, I appreciate the value for money this vehicle gives any aspiring off-roader. These are very capable vehicles and there are lots of aftermarket parts available to improve it. When Larry Chen of Speedhunters fame bought his manual transmission FJ and started posting his stunning pictures, I literally looked at it in a different light. When modified, it doesn’t look bad at all and I was wondering what I could do to make my vision stand out from all the other modified FJs out there. Even though the design doesn’t naturally lend itself to being modified into a 2-door version, I thought I’d give it a try. To keep one of the main design features of the FJ, I carried the door/roof line over to the concept and kept the two-tone paint scheme. The shorter wheelbase I first tried looked rather silly due to odd proportions and therefore I decided to keep the original. The resulting proportions hint at the equivalent Land Rover Defender 110. A meatier set of BF Goodrich tires on budget-friendly steel wheels called for alterations of the front bumper, even though a lift kit with coil springs was utilized. While at it, the rear bumper was also modified to improve the departure angle and because two spare tires are better than one, I mounted them Dakar or Baja 1000 style in the area formerly occupied by the trunk.
If you want to compare the panel van conversion to the original picture, click here.
05
After the recent modification of a Cadillac Fleetwood Brougham I went looking for more GM B-platform cars that could be modified. I found a picture of a Buick Roadmaster Estate Wagon and immediately started to modify it. What I came up with is essentially similar to a Chevrolet Nomad: a two-door wagon. Because it looked rather odd with windows, I decided to take the conversion even further by modifying it into a panel van, lowering the car and giving it a wider track. Thanks to the body-on-frame design this shouldn’t be too hard to create in reality.
You don’t like it? Please feel free to enjoy the original picture.
02
Following my recent idea about downsizing US-cars without losing interior space, and creating a funny-looking Cadillac in the process, got me thinking. If you can shrink something without compromising interior space, could you enlarge something like a smart fortwo and win an additional passenger seat? Not very likely because cutting, altering and welding the smart Tridion safety cell is next to impossible due to the material utilized. But if the smart can’t be enlarged easily, a FIAT Multipla with six seats sure enough can be shortened with a few basic power tools, can’t it?
Let me present the FIAT Multipla Triposto. The perfect car for a school run with two kids. Needs only a tiny space for parking, is very manouverable in tight cities and looks very adorable.
Okay… maybe adorable isn’t the right expression and cute in a weird way would probably better describe a short wheelbase Multipla.*
* Or how would you describe a short wheelbase hippopotamus? 😉
14
Staring at the undercarriage of a car that has massive rust issues is more depressing than inspiring. Combing the rust particles out of my scalp proved to be inspiring though, because the vehicle in question is a gorgeous Hofmeister-designed BMW E9 coupé a friend of mine bought last year – sight unseen. As always, I let my mind wander in the following days to see what ideas I could come up with. Shooting Break? No, I want to do something else with it and create something out of the ordinary. CS means Coupé Sport and while talking about the recent trend of labeling new BMWs Gran Coupé, the coin dropped. A long list of modifications would be necessary to bring this to life. It sounds easier to do this in Adobe Photoshop, but it went through a lot of iterations until I was happy with the result.
Apart from the obvious additon of two doors, there are many modifications you likely didn’t spot right away when looking at the picture. The wheelbase is slightly longer to create room for the passengers feet and the front doors are shorter to keep the proportions in check. Extending the roof was a challenge in itself, because I also had to adjust the chrome trim above the windows. The E9 has frameless windows and I wanted to keep it that way. In order to be able to open the rear windows fully, I had to design a guide for the window, because I didn’t want to alter the C-pillar. Subtle, elegant and practical, just as the Karmann designers and engineers might have done it when challenged with such a task back in the days. Content with how the 4-door body turned out, I turned my attention to the wheels. The dinky original 14″ wheels look too small even for the 2-door and therefore I decided to utilize 15″ wheels with the same design. The hubcaps were carried over from the original 14″ wheels.
For comparison, please take a look at the original picture.
10
Ever since driving an early Porsche 928 at the age of 21 I loved these futuristic but timeless grand tourers. The only thing that always bothered me design-wise was the shape of the fenders. On the later models they are wider, but still have a weird shape that make the car look strange when lowered. No worries though, as this can easily be improved with photoshop. While at it, I realized that this wouldn’t work on the real car and I had to find a solution. Overfenders have been popular to fix wheel fitment issues for decades and are now more popular than ever before. Instead of taking an exaggerated approach like Kato-san from LB Works, I designed a more subtle set of overfenders that tie into the original design of the 928 and cover the concave Forgiato wheels. To clean up the flanks, the door handles have been integrated into the side trim of the car. The air vents are integrated into the original bodywork and help to keep the brakes cool.
Originalists might cringe and prefer to look at the original picture.
07
Inspired by lead sleds and other vintage customs, I decided to apply a tried and tested recipe to a vehicle nobody ever customized: the 1954 Panhard Dyna Z. A top chop is a classic modification to alter the roofline and overall appearance of a car. It also reduces drag and therefore makes the car faster. Aerodynamic enhancements are especially important if adding more horsepower isn’t really an option. Mind you, this is a rather small vehicle and fitting an engine larger than the original 851cc engine would be a massive challenge. Not too many of the ~ 140.000 built are left and I doubt that many enthusiasts would enjoy seeing one of the few leftover Z cars “butchered” just for aesthetic purposes. However, nobody can object to modifying a couple of pixels. If you don’t like it, you might enjoy looking at the original picture instead.
01
Happy New Year! The first photoshop chop in 2018 is an old project from years ago that I finally got around to finish now. I found the original picture of the SAAB 96 and immediately thought this vehicle #needsmorelow. Lowering it and enlarging the wheels made it look better, but the little something that makes it special was still missing. In order to keep it period-correct, I used the natural lines and added some graphics. These days you would probably utilize vinyl stickers, but back then it would have been painted. All in all a fun little project to prove that every vehicle has potential to look better.
22
This photoshop chop took way longer to finish than all the other pictures I created this year. It all started with looking at a Peugeot 504 brochure from the 1970’s in January. Having always loved the Pininfarina-penned styling of the coupé and convertible, I wondered why there are no tastefully modified cars out there. These vehicles are not even too expensive to buy, despite having a history of motorsport ventures in rallye and racing. As always, the “what if (I had the money)” question followed immediately and all kinds of crazy modification ideas popped up in my mind. However, modifying this elegant coupé without messing up the lines completely posed a challenge. In the end I went with a retro-inspired theme the Japanese call works style. Imagine an engine with substantially more power, modern suspension and brakes. This necessitates larger wheels and a set of overfenders to cover them. I tried to keep them subtle and close to the original design of the fenders. Finding a period-correct design for the wheels also was a challenge. Campagnolos work well with the larger diameter and the conversion to the rather large Peugeot PCD. A good friend of mine suggested to add a ventilation flap on the roof, similar to the classic Jaguar E-Type race cars, and I happily adopted this brilliant idea. The hash marks on the fenders are Peugeot Talbot Sport colors from the early 1980’s, keeping with the idea that a conversion like this might have been built when this was just an affordable used car.
Fine art prints will be available early in 2018. Make sure to pre-order soon, as this will be a limited edition of only 73 numbered and signed pieces. The prints are without watermarks.
Click here to see the original picture.
20
Finding a photograph of a late 90’s Cadillac Fleewood Brougham towing an Airstream travel trailer got me thinking. What if the people owning a rig like this had a need for more trunk space, but still wanted to tow the trailer with a B-body based car? They would have had the choice of downgrading to a Buick Roadmaster oder Chevrolet Caprice – or converting their Cadillac into a wagon. This shouldn’t be too hard to do, right? However, instead of just using the rear glass from either one of the standard GM wagons, I went for a panel van look. As the Fleetwood Brougham already has a vinyl roof, it is a no-brainer to use this material for the wagon conversion. Not having windows also allows to add useful storage cabinets on both sides of the trunk. And because I have a reputation of never leaving the suspension height and stance as it came from the factory, the Cadillac was lowered and fitted with larger diameter wheels, shod with lower profile tires. To round it off and achieve a consistent design, the Airstream was also lowered and given a similar wheel treatment.
04
This was another one of those 15 minute challenges: create a camper van or RV that would be fun to drift, if equipped with an engine that makes suitable torque and horsepower. I started looking for a base picture to begin the photoshop chop. The Roadtrek 210 Popular, based on the rear wheel drive V8 Chevrolet Express Van, has a very nice and sporty looking body kit that accomodates a set of overfenders nicely. With a set of Watanabe-style wheels that are converted to an 8-lug pattern and a healthy drop in ride height this beast might take you to the race track, provide all kinds of drifting fun during the day and living quarters for the night. You would have to secure all your cutlery and other items very securely for the drift sessions, though. 😉
PS: It could also be a nice and capable tow-rig for a drift car.
22
Imagine living in the 1970’s. It was a decade with plenty of grassroots motorsport events, e.g. hill climbs. Tuning shops popped up in sheds and small garages everywhere and catered to the individual needs. If you drove an Opel Kadett C, a Ford Escort Mk1 or even a VW Beetle you had plenty of choice when it came to car modification. But where would owners of the innovative, rotary-powered NSU R0 80 go to ask for tuning parts? Apart from the factory-option Fuchs wheels, there was a very limited selection. Maybe a few chrome-plated dress-up parts or a set of mudflaps. Fast forward 40 years and the magic of Adobe Photoshop easily makes it possible to modify the mighty NSU Ro 80 during a 45 minute lunch break.
I always thought the lines of the classic NSU have at least a little bit of potential and to prove the point that the design of every vehicle can be improved, I dug into it. As usual I started with a set of larger diameter wheels and lowered the car. To get the stance right and to avoid a rather stupid looking rake, I relocated and reshaped the rear fender. Surprisingly it makes the lines of the body look more elegant. To accentuate this, I also shaved the rear door handle and changed the side skirt from black to body color. All these modifications would have been possible when the car was in production, but the low profile tires are a more contemporary touch. Let’s call it artistic freedom, shall we?
12
When the Opel Signum first came out I thought it was a horrible design with odd proportions. Not much has changed over the years – I still think the proportions are not great on the Insignia. But nonetheless, my motto is that you can turn every boring car into something more interesting. Et voilà – let me present the two-door Opel Insignia Panel Van with a Steinmetz bodykit and a Thule box on the roof rack. Gold colored Rays TE37 wheels look good on most cars and prove the point that often the wheels make the car look good in the first place. It was fun creating this with Adobe Photoshop. Now, who dares to do this in real life?
12
This is another one of those lunch break quickies. Found an old picture of a Renault R21 Turbo, as driven by the French Gendarmerie Nationale. Larger diameter OEM+ wheels, lowering and a few details here and there. Done.
08
A friend of mine came up with the idea of converting a Nissan Skyline GT-R35 to transport a motorcycle in style. And hey, why shouldn’t you want to do do just that? All you need is a GT-R35, right? Measure the motorcycle, in this case a Kawasaki Ninja H2R, and figure out how you want it to sit once loaded. I prefer to have it flowing with the lines of the car, so I located it rather low. It should still clear the rear axle, though. Now just get the cutting tools out and have fun slicing this fine sportscar into various pieces. Extend the wheelbase, fabricate some panels and you’re almost finished. This is what I thought and the result didn’t please me one bit, to be honest. Therefore I went to the additional trouble of adding a set of butterfly doors à la Mazda RX-8 and a set of overfenders for the rear wheels. So far so good – but the conversion wouldn’t be complete without lowering and a set of nice Forgiato wheels and Pirelli P Zero tires. And while we are at it, we might as well add brakes from the Liberty Walk Lamborghini Murcielago for good measure to slow it down properly. Do you think Kato-san would approve?
Now load up your sportsbike, strap it down securely and have fun! 🙂